Which regulation of the electricity at work regulations relates to isolation?

Regulation 13 requires suitable precautions to be taken to ensure that once equipment is isolated so that work can be carried out on it, it cannot become electrically charged again while the work is being carried out on it.

Which regulation governs the safe isolation of Electricity?

The Electricity at Work Regulations 1989 definition of ‘isolation’ is given in regulation 12 and means the disconnection and separation of the electrical equipment from every source of electrical energy in such a way that this disconnection and separation is secure.

What is Regulation 14 of the Electricity at Work Act?

The Electricity at Work Regulations 1989 has a requirement in regulation 14 that: No person shall work on or so near any live conductor that danger may arise unless – 1. … It is reasonable in all the circumstances for the person to be at work on or near it while it is live; and 3.

THIS IS INTERESTING:  Do fans drain electricity?

What specific regulation covers Electricity in the workplace?

​​Electricity at Work Regulations (1989)

The ​Electricity at Work Regulations apply to all aspects of the use of electricity within the workplace. They place duties on employers, employees and the self-employed to prevent danger. carry out work on electrical systems carried out in a way that prevents danger.

How does regulation 13 of the EAWR?

Regulation 13 – Precautions for work on Equipment made Dead

Adequate precautions shall be taken to prevent electrical equipment, which has been made dead in order to prevent danger while work is carried out on or near that equipment, from becoming electrically charged during that work if danger may thereby arise.

Is Electricity at Work regulations Law?

The Electricity at Work regulations apply to every employer and self-employed person in a workplace, and every employee, who must co-operate with their employer by doing everything possible to ensure electrical safety is followed under the regulations.

What is electrical isolation?

Isolation is the electrical or magnetic separation between two circuits and often used to separate two distinct sections of a power supply. The isolation provides a barrier across which dangerous voltages cannot pass in the event of a fault or component failure.

What is the requirement of Regulation 14 which allows for live working?

WORK ON OR NEAR LIVE CONDUCTORS (REG.

14(b)) means that all necessary precautions must be taken to ensure it is reasonable for someone to be asked to work. (4) Regulation 14(c) could imply that in the absence of injury no precautions can be required in advance.

THIS IS INTERESTING:  Why are elements of electric heating devices made of an alloy?

What are the three requirements of Regulation 14 that allow live working?

The conditions are:

it is reasonable in all the circumstances for the person to be at work on or near that conductor while it is live. suitable precautions (including, where necessary, the provision of personal protective equipment) have been taken to prevent injury.

Are the Electricity at Work Regulations 1989 Statutory?

The Statutory Instrument to which we must adhere is the Electricity at Work Regulations 1989, made under Section 15 of the Health and Safety at Work Etc. Act 1974. This falls under the remit of criminal law and is enforced by a number of agencies, including the Health and Safety Executive (HSE) and Local Authorities.

Which provision of the Electricity at Work Regulations relates to safety inspecting electrical systems?

General safety in the workplace, including the safety of electrical systems and appliances, is required under the Health and Safety at Work, etc Act 1974. Specific electrical safety duties are required under the Electricity at Work Regulations 1989 (EAW), which applies to all non-domestic premises.

What does the Electricity Act 1992 do?

The Electricity act is designed to protect the health and safety of members of the public in connection to electricity and provide for the regulation, supply, and use of electricity in New Zealand.

Which regulation cover the provision of health safety and welfare in the workplace?

The Workplace (Health, Safety and Welfare) Regulations 1992 cover a wide range of basic health, safety and welfare issues and apply to most workplaces (except those involving construction work on construction sites, those in or on a ship, or those below ground at a mine).

THIS IS INTERESTING:  Where is the maximum electric potential?